GE PLASTICS CYCOLAC® MG47 - ACRYLONITRILE BUTADIENE STYRENE (ABS) | ||
CYCOLAC® MG47 - ACRYLONITRILE BUTADIENE STYRENE (ABS) | ||
GE Plastics Cycolac® MG47 - Acrylonitrile Butadiene Styrene (ABS) | ||
Cycolac® acrylonitrile-butadiene-styrene (ABS) is a resin that provides a favorable balance of engineering properties. ABS has good impact strength, dimensional stability at elevated temperatures, and excellent appearance. ABS is a lightweight plastic with toughness and rigidity. Some disadvantages are poor solvent resistance, low dielectric strength, and service temperatures. Cycolac® ABS is light cream color in its natural state. | ||
APPLICATIONS | ||
Cycolac® ABS can be used in automotive, housewares, small appliance housings, personal care, medical devices, electronics, telecommunications, construction products, and toys. | ||
Automotive Specifications | ||
• FORD WSK-M4D681-A | ||
• GM GMP.ABS.001 | ||
• CHRYSLER MSDB 200 | ||
Properties | ||
Physical | Nominal Values (English) | Test Method |
Density - Specific Gavity | 1.04 sp gr 23°/23°C | ASTM D792 |
Melt Flow Rate (230°C/3.8kg) | 5.60 g/10 min | ASTM D1238 |
Mold Shrink, Linear-Flow (0.125 in) | 0.0050 to 0.0080 in/in | ASTM D955 |
Mechanical | Nominal Values (English) | Test Method |
Tensile Modulus (0.2 in/mm) | 330,000psi | ASTM D638 |
Tensile Strength @ Yield (Type I, 0.2 in/min) | 6,400psi | ASTM D638 |
Tensile Strength @ Break (Type I, 0.2 in/min) | 4,900psi | ASTM D638 |
Tensile Elongation @ Yield (Type I, 0.2 in/min) | 2.0% | ASTM D638 |
Tensile Elongation @ Break (Type I, 0.2 in/min) | 24% | ASTM D638 |
Flexural Modulus ( 2.00 in Span, 0.05 in/min) | 340,000psi | ASTM D790 |
Flexural Strength @ Yield ( 2.00 in Span, 0.05 in/min) | 10,500psi | ASTM D790 |
Impact | Nominal Values (English) | Test Method |
Notched Izod Impact (73°F) | 6.00 ft-lb/in | ASTM D256 |
Instrumented Dart Impact (73°F) | Total Energy: 274 in-lb | ASTM D3763 |
Thermal | Nominal Values (English) | Test Method |
DTUL @ 264psi - Unannealed (0.125 in) | 180°F | ASTM D648 |
DTUL @ 66psi - Unannealed (0.125 in) | 206°F | ASTM D648 |
Vicat Softening Point (Rate B) | 210°F | ASTM D1525 |
CLTE, Flow (-40°F to 100°F (-40°C to 38°C)) | 4.9E-005 in/in/°F | ASTM D696 |
CLTE, Transverse (-40°F to 100°F (-40°C to 38°C)) | 4.9E-005 in/in/°F | ASTM D696 |
Electrical | Nominal Values (English) | Test Method |
Arc Resistance (PLC) (Tungsten Electrode, 0.125 in) | PLC 6 | ASTM D495 |
Ignition Characteristics | Nominal Values (English) | Test Method |
UL File Number (USA) | E121562 | |
Flame Rating - UL (0.0600 in) | HB | UL 94 |
UL 746 | Nominal Values (English) | Test Method |
Rel Temp Indx Mech w/o Imp | 140°F | UL 746 |
Rel Temp Indx Mech w/ Imp | 140°F | UL 746 |
Rel Temp Indx Elect | 140°F | UL 746 |
Comparative Tracking Index (CTI) (PLC) (0.125 in) | PLC 0 | UL 746 |
High Voltage Arc Tracking Rate (HVTR) (PLC) (0.125 in) | PLC 3 | UL 746 |
Hot-wire Ignition (HWI) (PLC) (0.125 in) | PLC 3 | UL 746 |
High Amp Arc Ignition (HAI) (PLC) (0.125 in) | PLC 0 | UL 746 |